SailNet Community banner
1 - 1 of 1 Posts

· I'd rather be sailing
Joined
·
1,901 Posts
Reaction score
38
Our SSB is grounded to a large amount of copper stripping through the aft section of our boat. We have an additional ground in the form of a large anode, about 10" x 4" x 3/4" (approximate size) that's inset to our hull on the exterior, with two large bolts that are encapsulated through the hull and then connected to our grounds on the interior of Pelican. It sits mostly flush with the exterior of our hull and the interior has been fiberglassed to add thickness in this area.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top