Had an anchor shackle that would not budge even with PB Blaster and leverage. Found a Dremel with a cutting blade made it a quick painless five minute job.
THE BIANKA LOG BLOG: REMOVING A FROZEN ANCHOR SHACKLE AND SWIVEL
I would recommend using a reinforced cutting disk. But, I used a regular cutting disk and it still worked fine. Just bring extra disks in case you break one or two.
THE BIANKA LOG BLOG: REMOVING A FROZEN ANCHOR SHACKLE AND SWIVEL
I would recommend using a reinforced cutting disk. But, I used a regular cutting disk and it still worked fine. Just bring extra disks in case you break one or two.