SailNet Community banner
1 - 3 of 3 Posts

· Telstar 28
Joined
·
43,281 Posts
Reaction score
297
Is the mast on the Bristol deck-stepped? If so, rigging an A-frame for it of your own would not be that difficult. It would also save you mast stepping and unstepping fees in the future.

Where on Buzzards Bay is the boat???
 

· Telstar 28
Joined
·
43,281 Posts
Reaction score
297
Again, it would help if you said where the boat was. I'm often down in the Buzzards Bay area, often in Marion and Fairhaven, since I spend a lot of time on boats in both places...
 

· Telstar 28
Joined
·
43,281 Posts
Reaction score
297
if you're doing this next weekend, let me know, I might be able to help...
sweet, thanks for the link! That is basically the same setup that the Alberg site uses, except theirs is built with scaffolding pipe. I think i'll build one going the steel route for strength and ease of disassembly:) I just looked it up and my mast is 31'9". I think it is very similar to the catalina 27 so the dimensions should be close enough. I'm still wiched nervous to do it myself though! If anyone wants to come see the possible carnage one of these weekends let me know!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top