SailNet Community banner
1 - 1 of 1 Posts

· Registered
Joined
·
7,207 Posts
Reaction score
3,542
Have had good luck with dymeena for this purpose and removeable inner stormsail stay to supplement solent rig. Can use device from Johnson or Wichard to tension stay. Boat was built with this set up in mind. Remove stay when coastal.
However agree with Faster this is way overkill for you and an unnecessary expense. Would only be justified for offshore passage making.
+1 on what Faster advised. If you wanted storm jib they make them to fit over roller furled jibs. If no roller furling search used sail sites for storm jib that will fit. Most storm jibs are rarely used so used ones usually in good shape.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top