SailNet Community banner
1 - 1 of 1 Posts

· Registered
Joined
·
1,072 Posts
Reaction score
277
A round piece of tubing screwed to a saw horse inserted into the base so it can spin. Cut a v-notch into the other saw horse to keep it in place when it spins. Paint and spin. Start at the top where people won't see it. By the time you reach the base, you'll Rembrant. Once it cures, finish the top foot that you could't paint before. You'll be so good by now, people will never be able to see the transition from the deck!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top