SailNet Community banner

1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1 (Edited)
Hunter 36, keel problem

Hunter 36, built in 2006. Following a grounding in 2012 the keel was repaired by a yard, but the keel was not taken off. After some time (2-3 years) i noticed some water around the keel bolts. This ingress has increased and after this sommer sailing and now approximately one dl/day in the marina and some more during sailing.
Does anyone have details or drawings showing hull/keel interface. The keel is of the shallow type and is bolted to the hull by 6 off 1" bolts and 2 off 1/2". Is the keel bonded to the hull by epoxy or flexible materials?

Thanks
 
1 - 1 of 1 Posts
Top