SailNet Community banner
1 - 2 of 2 Posts

·
Registered
Joined
·
4,725 Posts
A short length of plastic pipe sporting a computer fan can suck the air down to foot level or direct with an elbow.thru the bilge to forward. A properly designed (more massive air tight) down low will alleviate the rearanged table situation Bark smells a lot better than Diesel when it backdraughts .My homemade 13"x14" steel plate with gold plated glass door was clean ,would burn most of the night and would cook an omelette as if by magic. Don't give up on wood .Knot rocket science.
 

·
Registered
Joined
·
4,725 Posts
Joe, Just trying to be helpful .Guess some people aren't very competent or able to think well. If the problem is thermal expansion of sheet metal or using bailing wire You are on your own. My 40 years experience of very successfull building and operating wood stoves on boats won't be of much use to you.Nor will I offer it again.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top