SailNet Community banner
1 - 4 of 4 Posts

·
Registered
Joined
·
141 Posts
Discussion Starter · #1 ·
Does anyone have any tool and/or technique recommendations for sanding the inside radius between the bottom of the boat and the keel? I have removed the bottom paint from all the flat surfaces on the bottom, keel, and rudder with a random orbital and I hate to resort to hand sanding now.
 

·
Registered
Joined
·
14 Posts
Harbin - what I have used is a piece of a noodle that kids use in a swimming pool. It's about 3-1/2" dia. and is soft enough to conform to the shape of the boat but dense enough to hold the radius you have. Wrap a sanding board sheet of sandpaper (approx. 3-1/2 X 17 ) around it and have at it. Larry.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top