SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
41 Posts
The interior teak on our new '88 Sabre 30 had only been teak oiled by the PO.It looked dull and a little dirty. We are cleaning it with Starbrite Teak Cleaner, sanding smooth, Applying Watco Teak oil finish to feed the wood, letting that dry 72 hours, then a quick wipe with acetone to get off the surface teak oil, followed by 2 coats of gloss Minwax wipe on polyurethane and a top coat of satin Minwax wipe on poly. It looks great and it should just need to be wiped down periodically to remove surface dirt.We didn't want to have to keep reapplying teak oil, so spending a little more time in the beginning seemed justified in our minds.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top