Joined
·
4,860 Posts
- Reaction score
- 2,510
If the engine was winterized, ensure that all cooling water hoses and clamps have been reattached and securely tightened.
When AlexW says "all through-hulls", don't forget depth and speed transducers.
Inspect and replace zincs before splashing as well, to save yourself the cost of a diver later.
It sounds like you were hauled with the mast up, so I guess you don't have any standing rigging work to do.
Otherwise, Launching Day is a very exciting day to watch your sleeping beauty awaken after a long winter's slumber.
When AlexW says "all through-hulls", don't forget depth and speed transducers.
Inspect and replace zincs before splashing as well, to save yourself the cost of a diver later.
It sounds like you were hauled with the mast up, so I guess you don't have any standing rigging work to do.
Otherwise, Launching Day is a very exciting day to watch your sleeping beauty awaken after a long winter's slumber.
