SailNet Community banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,171 Posts
Discussion Starter · #1 ·
There is a steady drip from the raw water pump on my 4-107. It seems to be coming from behind the body, in the shaft area. I suspect the shaft seal or the bearing seal. Has anyone repaired this problem?
 

·
Senior Member
Joined
·
19,485 Posts
I've replaced the seals on a couple of Jabsco pumps over the years.. fairly simple job, IIRC I used a vise to press the seals in, but it's pretty straightforward, and you can buy the seals separately.

Jabsco Pump Shaft Seal SP2701-21
 
  • Like
Reactions: WanderingStar
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top