SailNet Community banner
1 - 3 of 3 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter · #1 ·
Seems like one blade is stuck and not moving properly. We noticed the engine was getting hot for some reason and i think that might be the problem.

Tommorow we will dive under, remove the small line that is stuck in there and try to get that blade to work. I am wondering how hard it would be to fix this or to remove the prop from there while in the water.

Link to video= propeller on Vimeo
 

·
Registered
Joined
·
104 Posts
Discussion Starter · #3 ·
The thing is that small rope wasent there last time we dive and that blade was not working properly.
 
1 - 3 of 3 Posts
Top