SailNet Community banner
1 - 1 of 1 Posts

·
ASA and PSIA Instructor
Joined
·
4,334 Posts
Strip, clean them and re-assemble, they should be good to go. If you have any broken springs or rounded pawls, replace them. See Lewmar

I use lamp oil in a large 10 gallon plastic tub as the cleaning agent , you can just dump the dirty parts into the tub, scrub them with a brush, then dry them.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top