i just bought a stereo for my boat. looking at the wiring diagram i am a little confused. i couldn't get the diagram to scan legibly but this is what is says:
blue wire: remote turn on. connect to amplifier or power antenna.
black: ground. connect to ground.
red: accessory. connect to existing ignition circuit or switched 12v source.
yellow: memory. connect to battery circuit or constant 12 v source
the rest of the wires are just for the speakers.
blue i don't need
black goes to ground, i get that.
red would go to the stereo breaker on the elec. panel.
yellow, would that go back to the dc negative bus bar? this is where i'm getting confused.
blue wire: remote turn on. connect to amplifier or power antenna.
black: ground. connect to ground.
red: accessory. connect to existing ignition circuit or switched 12v source.
yellow: memory. connect to battery circuit or constant 12 v source
the rest of the wires are just for the speakers.
blue i don't need
black goes to ground, i get that.
red would go to the stereo breaker on the elec. panel.
yellow, would that go back to the dc negative bus bar? this is where i'm getting confused.
