SailNet Community banner
1 - 1 of 1 Posts

· Senior Citizen
Joined
·
457 Posts
Reaction score
97
If they seem to be holding when torquing them down I would try some medium strength lock tight. That may work.
I would try Loctite before drilling new holes. If the threads on the screws are damaged it would be a good idea to replace them also.

Loctite is available in different strengths and for various size threads. Look up specs before purchase.
-CH
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top