SailNet Community banner

1 - 6 of 6 Posts

·
Detachable member
Joined
·
377 Posts
Discussion Starter #1
i'm going to install 3 exit plates in the mast. can i install two directly across from each other. ex. 1 at 5' on port side, 1 at 5' on starboard side or should these be staggered so as not to cut out too much mast in one area. the third will go about a foot above the 5' plates.
 

·
Telstar 28
Joined
·
1,000 Posts
Wchevron-

Stagger them if you can, both vertically and horizontally, so they don't line up with each other or with any other nearby cutouts in the mast. They should be staggered by about a foot if you can vertically.
 

·
Telstar 28
Joined
·
1,000 Posts
Glad to help. :) Post photos when you're done. :)
 

·
Detachable member
Joined
·
377 Posts
Discussion Starter #5
do you want pictures of just the exit plates and mast or should i include some of me performing the work in my leather thong and harness.:eek: :eek:
 

·
Telstar 28
Joined
·
1,000 Posts
Umm... just the mast exit plates...

EWWW... gotta buy some more Pyschlorox now.
 
1 - 6 of 6 Posts
Top