SailNet Community banner
1 - 3 of 3 Posts

·
Mondofromredondo
Joined
·
221 Posts
Discussion Starter · #1 · (Edited)
Wires in the mast

Can anyone tell me how the wires run through the inside of the mast on a PSC 34 ? Is there a channel or do the wires just dangle on the interior?

Thanks
Keith
PSC 34'
S/V Charity Rose
 

·
Mondofromredondo
Joined
·
221 Posts
Discussion Starter · #4 ·
Paul, Dave,
Thanks for the input. I can see that running the cable down the inside of the mast is defiently going to be the most daunting of the installation tasks.

Keith
 

·
Mondofromredondo
Joined
·
221 Posts
Discussion Starter · #7 ·
John,
Thanks for the input on the PVC.
So if I understand you correctly I would be securing the pvc to the existing PVC conduit in the mast with wire wraps. I don't recall seeing an inspection plate but it must be there. The chain sounds like an excellent and very easy idea.
Thanks much
Keith
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top