SailNet Community banner
1 - 1 of 1 Posts

Chesapeake Sailor
579 Posts

Before going up the mast check (with a continuity tester or multimeter) that 12V is going up the mast. If it is, then you may be very lucky and need only to change the bulb.

!90# will go up the mast, my 225 did - but make sure that you have similar heft and muscle at the base of the mast controlling the halyard (and you life). The descent will be controlled by the deck level tender, carefully tailing the halyard from wraps around the main halyard winch.

You may as well take the multimeter up with you and be sure that there is current at the lamp fitting.

1 - 1 of 1 Posts