SailNet Community banner
1 - 1 of 1 Posts

· Registered
Joined
·
93 Posts
Reaction score
2
screw-mounted cable tie mounting points
Anyone contemplating this on a cored hull should be very, very careful. If the screw penetrates the inner skin, it can create a pathway for water into the hull core. If you're going to do it anyway, bed the screw in some goop.

I would rather use the adhesive ties and replace them as they fail, or be certain that any screws go into uncored areas.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top