SailNet Community banner
1 - 1 of 1 Posts

· Registered
Joined
·
141 Posts
Reaction score
11
Check the sea strainer, flush out with a hose if needed. If it is air cooled pull the cover off the compressor and check the fins for dust.
Some units give a "low preasure" shutdown if the cooling unit is not performing properly. Dirty heat exchange can cause problems and put a real strain on the motor.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top