[mondofromredondo]

My 1988 PSC 34 has the standard dual bow roller with a spread of about 3" from center to center. My windlass that I hope to install is 8" from gypsy to gypsy. I see some of the newer PSC's have a dual bow roller with a larger spread. Can anyone tell me who builds these dual bow rollers with the bigger spread?

Thanks

 

[DaveMancini]

Call Thumper at PSC.

 

[mondofromredondo]

Dave,

I was actually on the phone with Thumper at the time you replied. As it turned out the photo I was looking at of a bow roller on a PSC 37 was not the standard bow roller installed on the PSC's. The standard bow roller is seperated by a good 2-3" from adjacent bow roller. This works out well for my windlass install.

I simply had not been down to the boat in a month or so and had forgotten what my roller looked like. The photo I used for a reference was not a good reference.

Thanks again !