SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,446 Posts
I think the yellow flame is created by too much fuel. Try closing the port a little and see if you can get the yellow out. Then conduct the test again making sure:
1 same pot with lid.
2 start temperature of the water and ambient air is the same.
3 the thermo probe does not touch the bottom of the pan.
4 Don't use too large of a pan as the origo is intended for smaller quantity cooking on a sailboat.
I would be interested to see revised results.
John
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top