SailNet Community banner
1 - 2 of 2 Posts

·
Registered
Joined
·
238 Posts
Discussion Starter · #1 ·
I started painting the inside of the hull using a good quality semi-gloss white oil paint. I'm not talking about the bilge but the area under the berths on either side of the cabin. This area is below the exterior water line. I'm starting to second guess myself and I'm wondering if this kind of paint is OK for the job I'm doing. Any comments appreciated.
 

·
Registered
Joined
·
238 Posts
Discussion Starter · #7 ·
I finished the job with the oil paint. Looks a lot better. I'm won't get my boat launched now until next spring so I won't know how it's going to stand up until the end of the 2010 season. Thanks for all your advice. I bought this boat knowing absolutely nothing but by the time it's finished, I'll know just enough to be considerably dangerous. Thanks again
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top