SailNet Community banner
1 - 2 of 2 Posts

·
.
Joined
·
1,000 Posts
JG, it's actually 9% not 6%, and that is to compare with the volume of the cockpit bellow the lowest coming.

From your measurements: 25x9.6X2.75x0.09= 55.6

You have a maximum allowable of 55.6 feet you can not exceed.

So you have to measure the volume of your cockpit, but from the top of the lowest coming to the cockpit floor,

height of lowest coming X Lenght X Width...that number has to be inferior to 55.6 feet

Alex

link to ISAF Appx J cat5
 

·
.
Joined
·
1,000 Posts
Joe, after posting my initial post, I tried to edit, because it was missing stuff and Sailnet crapped on me and I couldn't do it.

Now I edited it so it's clear.

George is right, it has to do with the maximum water allowed to be held in the cockpit
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top