SailNet Community banner
1 - 1 of 1 Posts

·
Barquito
Joined
·
3,853 Posts
One small additional step: Try to wet-out the void with unthickened epoxy before filling with the thickened epoxy. That will prevent the core material from wicking the epoxy out of the thickener. Not sure how you would do this with a big hole. Maybe form a dam with tape, pour the epoxy in, then let it drain.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top