SailNet Community banner
1 - 1 of 1 Posts

Ā· Senior Smart Aleck
2,150 Posts
Reaction score
No, just put more coolant in the filler port on the heat exchanger until it is as full as the manual directs, probably up to the exit hose that drains to the overflow tank. Reads as if your system operated properly and the extra coolant, when hot and under greater pressure, flowed into the overflow tank as it should.

Just make sure your overflow tank is at the proper level with respect to the filler port exit hose.

If your coolant level in the heat exchanger is proper, and then your overflow exceeds maximum you might have a problem of too much coolant in the system.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.