SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,491 Posts
Wrong, Maine. I have the same type and did this a couple of years ago. Access for me is easy as it's mounted on a bulkhead forward of the engine. I spent most of my time cleaning the filter (I'm in fresh water), and in replacing the hoses, taping the threads on the drain screws, and changing and reseating the o-rings.

I didn't do quite that minty a cleaning job on the body as it wasn't necessary. They are a nice bit of kit, those Perko strainers.
 
1 - 1 of 1 Posts
Top