SailNet Community banner
1 - 1 of 1 Posts

· Registered
202 Posts
Reaction score
Another tool to cosider using, IF you choose the scraping route, is a commercial painter's tool. It is referred to as a CARBIDE scraper, and is much
more effcient than any regular steel scraper.
I'm a retred painting contractor and would not use any other tool.
Available at Sherwin Williams usually.
It wll remove the paint with MUCH less effort on your part.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.