SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
629 Posts
To reinforce a glue up like this you have a few choices, using a biscuit joiner would be my first choice, but if you don't have one or can't barrow one then that is not a piratical solution for a small project. Or you can use the old dowels like the biscuits. General Tools & Instruments 1/4-Inch to 1/2-Inch Dowel Center Transfer Plugs - Dowell Jig - [email protected]@[email protected]@http://ecx.images-amazon.com/images/I/31K%2BTUcTS%[email protected]@[email protected]@31K%2BTUcTS%2BL cleat. And the easiest way would be the add your new cleat and add a splice piece of wood under the cleat overlapping the old on the underside, this also could be a metal splice with screws.

You can also use a shiplap or tongue and groove.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top