SailNet Community banner
1 - 2 of 2 Posts

·
Registered
Joined
·
128 Posts
Discussion Starter · #1 ·
I'm currently refitting the tiller steering, and rudder on my C&C 25. The bronze gudgeons mounted to the stern have worn over the years and now the tiller has a lot of slop in it. I removed the rudder and cleaned up the Pintels which are heavy duty and stainless steel straps. They are in excellent condition so I'm assuming they were replaced no too long ago by a PO.

I have looked online and in some of the catalogs but can't seem to find a replacement that looks quite like the old gudgeon. (see photo). I have seen lots of places carry what they call a medium duty stainless steel gudgeon with a nylon insert for 1/2" pintels. Would that be a satisfactory replacement?

The attached photos show two replacements I have found through local West Marine. Of course the other picture is the part needing replaced.
 

Attachments

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top