SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,668 Posts
The furling line should feed onto the drum. If it's going around the headstay, then look at the placement of the control blocks. I have one less than 1' from the drum to make sure that the line feeds correctly.

When the wind is up, we tend to control the unfurling with a little tension on the furling line. That keeps it from getting away from us. So yes, keep some tension on your furling line and check the control block placement.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top