SailNet Community banner
1 - 1 of 1 Posts

·
Registered
Joined
·
13,641 Posts
Ray-
Not all coax is created equally. So in theory, you could put noise into the DC cables when you transmit on the radio, etc. In practice, no one can tell you for sure until you try it. And given the low power levels and simple systems...I'd try it. If there's a noise problem, separate them. Don't go hog wild on the cable ties until after you've tried it out.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top