SailNet Community banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
The belt on my Simrad WP30 broke and I need to replace it. How do I get the front wheel cover off. Do I unscrew the small screws on the back cover, or does it just pop off if you pry the front cover with a screwdriver?
 

·
Registered
Joined
·
32 Posts
Loosen the 6 pan head screws on the rear of the unit 2 1/2 turns . With clutch disengaged, the cover should come off. I don't think simrad supports these autopilots anymore. I was able to find a replacement belt on ebay.

If you will email me at captexicte at hotmail dot com, I will send you a copy of the service instructions for the wp30.

Rodger
 
1 - 3 of 3 Posts
Top