SailNet Community banner
1 - 1 of 1 Posts

7,327 Posts
Some marina's like Edmonds were David and I are at, they take the farthest back point to the farthest forward point, ie back of an out board motor/rudder/rear sprit to the fartherst forward point, ie anchor, bow sprit etc for length. Some like mine, you can get a 30' slip, but they allow 1' fore and aft for a max 32' boat in slip, and charge per the actual boat length.

Width, here, they charge differently for wider slips than narrower ones, if you have a really narrow boat, and only a wide slip is availible, take the wide slip, and put you name into the hat for when a narrower slip becomes availible. You would than get first crack at narrow slip, and new guy gets your old slip.

Good luck

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.