SailNet Community banner
1 - 1 of 1 Posts

· Registered
629 Posts
Reaction score
A few of tricks. The first and best would be to just stuff some fiberglass cloth or mat in the hole and screw it back in. 2) Stick a wood splinter on the hole... 3) Use a small piece if solid copper wire in the hole...3) Stick some stainless steel or brass wool in the hole...

If you are concerned about getting the core wet, seal with a caulking when reinstalling as well.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.