SailNet Community banner
1 - 1 of 1 Posts

· Sea Dweeb
Joined
·
143 Posts
Reaction score
3
The hub on a saildrive propeller is quite like the rubber hub in an outboard or outdrive propeller. The rubber hub is quite a bit larger than the barrel of the hub and is put in under considerable hydraulic pressure. Rubber hubs can "spin" for any number of reasons including "just because".

If you just need a re-hub and no other propeller work it should cost around $100 or so. $500 seems to be kind of abnormal.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top