SailNet Community banner
1 - 2 of 2 Posts

· Wingnut
Joined
·
70 Posts
Reaction score
41
Scrap it and start over with something that is strong enough in the first place. I made mine out of half inch plate. Stainless of course. Also, use a bolt to put the roller through so you can take it out easily.

Sent from my HUAWEI Y300-0151 using Tapatalk
 

· Wingnut
Joined
·
70 Posts
Reaction score
41
Anyone with welding skills and a drill press can build it. Taking it to a machine shop is likely to be more expensive than it needs to be. If you are able to do the prep work before taking it to a welder, you will save a bunch of money. Same is true if you can do that after welding cleanup.

Sent from my HUAWEI Y300-0151 using Tapatalk
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top