SailNet Community banner
1 - 2 of 2 Posts

·
Registered
Joined
·
36 Posts
NEVER sandblast...NEVER...at least not on fiberglass....soda blasting seems to be emerging as a preferred approach for a very smooth job if one can afford it...hand scraping and sanding is the usual way, but care must be taken with the toxic waste...Don Casey's book(s) on sailboat maintenance and repair give very good advice.
 

·
Registered
Joined
·
36 Posts
Long overdue apology...I admit that I misread the original post and focused only on the paint removal, not the what from...was very focused on a lot of paint removal at the time...sorry! At least now I have a clear conscience..
 
1 - 2 of 2 Posts
Top