SailNet Community banner
1 - 1 of 1 Posts

Ā· Registered
Joined
Ā·
2 Posts
Reaction score
0
There's a good article somewhere on the net on how to install an aluminum tank. Basically, DON'T let it sit on a surface - use non-metallic, non-absorbing (read plastic) strips to allow air circulation. And don't paint it. Basically avoid anything that would allow moisture to attack the tank.

As for the anti-siphon valve, I can't see why you'd need it and as you say, it's one more thing to go wrong. What you DON'T want is an airleak anywhere in the fuel intake.

druid
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top