SailNet Community banner
1 - 1 of 1 Posts

Ā· Registered
583 Posts
Reaction score
If your oil pressure gauge is reading correctly you should have a minimum of 10 psi per 1000 rpm at operating temperature.
If your oil pressure has changed at low rpm and you have an audible knocking noise you may have spun a big end bearing.
If you are able to remove the oil pan do so and look for pieces of bearing.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.