SailNet Community banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I am upgrading the electronics on my '86 Ericson 30+.

Currently have an old set of datamarine instruments (depth, speed, wind), which don't work properly. Also have a functioning Raymarine Autopilot with X-5 computer.

I'd like to replace wind, speed, depth in a way that can interface with the X-5 as appropriate I also have a home-brew Raspberry-pi that I use for GPS and AIS.

Considering the Raymarine T108 system as replacement but it's unclear how all of the wireless components would interface with the X-5 (or Pi).

Looking for some guidance around the performance of the T108, interfacing advice, and advice regarding a multi-function display that I could put at the wheel.

Looking to make installation as easy as possible (will be a DIY project while the mast is down for the winter) and aiming to keep my budget under ~$2K.

Thanks for the advice.
 

·
Registered
Joined
·
6,624 Posts
Install an N2K back bone and add N2K instruments and transducers
 
1 - 2 of 2 Posts
Top