Joined
·
980 Posts
Purchased a C&C with a Vire 7 a few short weeks ago. She ran fine during the inpection, and lasted about an hour after the purchase.
Running good and then quit. All I get is a little flywheel kickback every so often.
I have changed the plug, checked for spark - OK, fresh gas/oil mix(3%), rebuilt the carb, checked the point gap, and timing. No Good.
Ideas?
Running good and then quit. All I get is a little flywheel kickback every so often.
I have changed the plug, checked for spark - OK, fresh gas/oil mix(3%), rebuilt the carb, checked the point gap, and timing. No Good.
Ideas?