SailNet Community banner
1 - 2 of 2 Posts

·
Not Finished Yet
Joined
·
829 Posts
Discussion Starter · #1 ·
I replaced all of mine with the PVC lids that seemed to be what the factory used until recently. I had to buy a whole sheet, but only used half. If anyone wants the other half it is yours for the taking. Must pick up in Huston or Austin. I could also most likely have it delivered to Oriental NC for free.
 

·
Not Finished Yet
Joined
·
829 Posts
Discussion Starter · #5 ·
When I got the boat they leaked. Resealed following the factory instructions and they still leaked. Had new ones built from pvc and they still leaked. Had a pro redo them following the factory instructions and they still leak.

I have given up. Going to leave them as is until we get the boat to the factory, then will have them fix them, or try at least.
 
1 - 2 of 2 Posts
Top