SailNet Community banner
1 - 2 of 2 Posts

·
Sailor
Joined
·
935 Posts
According to the Seloc manual (for '75-'98 4JH and 4JH2 series engines):

Most engines have the following drains:
> Engine Block: rear of engine above crankshaft centerline.
> Header Tank: at low point of tank
> Expansion Tank: at bottom of tank
> Header Tank: at low point of exchanger.

The book makes it sound like there are petcocks for draining. While they draw many components, there is no illustration of these petcocks. Let me know how you make out. If desired, I can scan the pertainant pages and attach to an email.
 

·
Sailor
Joined
·
935 Posts
If I remember correctly, there are two for coolant. One on each side of the engine. If you are staring at the belt, they are about 3/4 way back on each side. There are small hex head bolts that you turn to get the flow going.

I'll try and take some pics for u if I can remember. Good luck!
Thank you! That helps. The pictures will also help immensely!

Tod :)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top